On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
IMEZI ASH10C Carbon Brake Pad
¥2,160
¥1,990
All purpose carbon rim brake pad. Compound is designed for all Astuto, Imezi, 167 rims (and more). Medium hardness with good stopping properties in wide range conditions. These are '4-way' fit - so they will work on Shimano, Campy and SRAM. Finally, one great pad to cover all your wheel and brake needs!
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
Astuto Performance Carbon Clincher 45mm 'Black Panther'
¥139,000
¥129,000
My original PC50 was a hit seller here in Japan. Fast, light and economical. I started to focus more on the competition series and dropped the PC50 interim after releasing the 167 series. I've remade the PC50 into a new, economical edition with updated rim shape, new hub design and continue the all handbuilt quality that made the original PC50 so great.
Specifications:
Rim - Full Carbon, filament wound, high Tg (250C+) thermo infused molding.
Spokes - 2.0mm Bladed Sapim CX Sprint stainless (black)
Lacing - 24 rear (2:2) , 20 front (radial)
Profile - 28.5mm (brake track) x 45mm deep, CFD optimized strut profile.
Hub - Astuto / Imezi - IM250 Classic
Weight (nominal) - Rear 860gr / Front 690gr (1550gr)
Tire Fitting - TLR (tubeless) or standard Clincher OK. 700c (622BSD) 19mm bead seat. 25c - 40c tire is best fit.
Recommended Use:
All around race, training, fast commuting and enduros. The 45mm deep profile holds top-end speed without compromising cross wind performance. This is a great 'cruiser' wheel and will definitely put a smile on your face every time you ride.
Accessories:
Brake pads, Skewers, Rimtape and TLR Valveset
Specifications:
Rim - Full Carbon, filament wound, high Tg (250C+) thermo infused molding.
Spokes - 2.0mm Bladed Sapim CX Sprint stainless (black)
Lacing - 24 rear (2:2) , 20 front (radial)
Profile - 28.5mm (brake track) x 45mm deep, CFD optimized strut profile.
Hub - Astuto / Imezi - IM250 Classic
Weight (nominal) - Rear 860gr / Front 690gr (1550gr)
Tire Fitting - TLR (tubeless) or standard Clincher OK. 700c (622BSD) 19mm bead seat. 25c - 40c tire is best fit.
Recommended Use:
All around race, training, fast commuting and enduros. The 45mm deep profile holds top-end speed without compromising cross wind performance. This is a great 'cruiser' wheel and will definitely put a smile on your face every time you ride.
Accessories:
Brake pads, Skewers, Rimtape and TLR Valveset
Competition 35mm Carbon Clincher
¥149,000
The classic choice. Our 35mm is truly an all-arounder with stiffness and agility to match any terrain as well as good aerodynamics to keep your gap when the going gets tough. The generous 26mm clincher section is compatible with tire size to 28 or 30mm making it a favorite for multi-surface roadways. Tubeless compatible with high durability and high Tg layup. We make each wheelset to match the hubs chosen to give even more customization and tuning capabilities to the rider.
Specifications:
Rim - Full Carbon, high modulus, high Tg (250C+) thermo infused molding.
Spokes - DT Aerolite and /or Sapim CX-Ray. DT Pro-Lock brass nipples.
Lacing - 24 rear (2:1) , 20 front (radial)
Profile - 26.5mm (brake track) x 35mm deep, NACA optimised strut profile.
Hub - Astuto SL straightpull, TruSpin design with 2:1 tangential lacing (rear).*
* Optional Onyx RD Hubsets offered.
Weight (nominal) - Rear 810gr / Front 660gr (1470gr)
Tire Fitting - TLR (tubeless) or standard Clincher OK. 700c (622BSD) 18mm bead seat. 25c - 35c tire is best fit.
Recommended Use:
All around race, training, sportif where condition flexibility is required and clincher tire is preferred. Aerodynamic 'sweet spot' of this wheelset is approximately 35-40kph.
Accessories:
Brake pads, Skewers, Rimtape and TLR Valveset
Specifications:
Rim - Full Carbon, high modulus, high Tg (250C+) thermo infused molding.
Spokes - DT Aerolite and /or Sapim CX-Ray. DT Pro-Lock brass nipples.
Lacing - 24 rear (2:1) , 20 front (radial)
Profile - 26.5mm (brake track) x 35mm deep, NACA optimised strut profile.
Hub - Astuto SL straightpull, TruSpin design with 2:1 tangential lacing (rear).*
* Optional Onyx RD Hubsets offered.
Weight (nominal) - Rear 810gr / Front 660gr (1470gr)
Tire Fitting - TLR (tubeless) or standard Clincher OK. 700c (622BSD) 18mm bead seat. 25c - 35c tire is best fit.
Recommended Use:
All around race, training, sportif where condition flexibility is required and clincher tire is preferred. Aerodynamic 'sweet spot' of this wheelset is approximately 35-40kph.
Accessories:
Brake pads, Skewers, Rimtape and TLR Valveset
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
Velocity Aileron Discbrake Wheelset
¥89,000
¥79,000
Our favorite 'go to' rim is the basis of many multi-purpose discbrake wheelsets. Whether touring, cyclocross, gravel or commuting. The Velocity Aileron can't be beat in terms of flexibility of use, weight and durability. Thevariety of finish options makes it apealing for any frame / bike combo. We love this rim and build alot of wheelsets based on various hubs with it!
We build these up on high quality DT Swiss 350 hubs and DT Swiss spokes. Other small, individual 'tweaks' may be available on request as each set is individually built for the customer one at a time.
We build these up on high quality DT Swiss 350 hubs and DT Swiss spokes. Other small, individual 'tweaks' may be available on request as each set is individually built for the customer one at a time.
Competition 35mm Carbon Tubular
¥149,000
Tubular version (glued tires). Our 35mm is truly an all-arounder with stiffness and agility to match any terrain as well as good aerodynamics to keep your gap when the going gets tough. The generous 26mm base section is compatible with tire size to 28 to 35mm making it a favorite for multi-surface roadways. High durability and high Tg layup. We make each wheelset to match the hubs chosen to give even more customization and tuning capabilities to the rider.
Recommended Use:
All around race, training, sportif where condition flexibility is required and tubular tire is preferred. Aerodynamic 'sweet spot' of this wheelset is approximately 35-40kph.
Accessories:
Brake pads, Skewers included.
Recommended Use:
All around race, training, sportif where condition flexibility is required and tubular tire is preferred. Aerodynamic 'sweet spot' of this wheelset is approximately 35-40kph.
Accessories:
Brake pads, Skewers included.
Competition 45mm Carbon Clincher
¥149,000
Go faster, longer!. Our 45mm is race tuned for speed, stiffness and agility The generous 26mm clincher section is compatible with tire size to 28 or 30mm making it a favorite for multi-surface roadways. Tubeless compatible with high durability and high Tg layup. We make each wheelset to match the hubs chosen to give even more customization and tuning capabilities to the rider.
Specifications:
Rim - Full Carbon, high modulus, high Tg (250C+) thermo infused molding.
Spokes - DT Aerolite and /or Sapim CX-Ray. DT Pro-Lock brass nipples.
Lacing - 24 rear (2:1) , 20 front (radial)
Profile - 26.5mm (brake track) x 45mm deep, CFD optimized strut profile.
Hub - Astuto SL straightpull, TruSpin design with 2:1 tangential lacing (rear).*
* Optional Onyx RD Hubsets offered.
Weight (nominal) - Rear 850gr / Front 700gr (1550gr)
Tire Fitting - TLR (tubeless) or standard Clincher OK. 700c (622BSD) 18mm bead seat. 25c - 35c tire is best fit.
Recommended Use:
All around race, criterium, triathlon where tempo sustained speed is required and clincher tire is preferred. Aerodynamic 'sweet spot' of this wheelset is approximately 35-45kph.
Accessories:
Brake pads, Skewers, Rimtape and TLR Valveset
Specifications:
Rim - Full Carbon, high modulus, high Tg (250C+) thermo infused molding.
Spokes - DT Aerolite and /or Sapim CX-Ray. DT Pro-Lock brass nipples.
Lacing - 24 rear (2:1) , 20 front (radial)
Profile - 26.5mm (brake track) x 45mm deep, CFD optimized strut profile.
Hub - Astuto SL straightpull, TruSpin design with 2:1 tangential lacing (rear).*
* Optional Onyx RD Hubsets offered.
Weight (nominal) - Rear 850gr / Front 700gr (1550gr)
Tire Fitting - TLR (tubeless) or standard Clincher OK. 700c (622BSD) 18mm bead seat. 25c - 35c tire is best fit.
Recommended Use:
All around race, criterium, triathlon where tempo sustained speed is required and clincher tire is preferred. Aerodynamic 'sweet spot' of this wheelset is approximately 35-45kph.
Accessories:
Brake pads, Skewers, Rimtape and TLR Valveset
Kona Series Carbon Clincher Wheelset
¥159,000 - ¥214,000
I designed this wheelset to favor the mid to long variety triathlon courses so often found in Hawaii and Asia. It is a great balance of aerodynamics, stiffness and weight. Working complimentary with modern framesets to achieve high efficiency and rider comfort especially for 70.3 and IM events. The wheelset features a 79mm rear profile with 69mm front profile. High compaction layup allows for the lightest rim possible and still maintain high strength and durability. Each set is custom drilled and built to suit rider's choice of hubs including Power Tap. Finally - we can color match the wheelset to the frame making this a highly distinctive and unique appearing wheelset that is a striking addition to any frameset.
Specifications:
Rim - Full Carbon, high modulus, high Tg (250C+) thermo infused molding.
Spokes - DT Aerolite and /or Sapim CX-Ray. DT Pro-Lock brass nipples.
Lacing - 24 rear (2:1) , 20 front (radial)
Profile - 26.5mm (brake track) x 69mm / 79mm deep, NACA optimised strut profile.
Hubs available -
- Astuto SL straightpull, TruSpin design with 2:1 tangential lacing (rear).
- Onyx RD hubset (sprague clutch system)
- Astuto / SOTEC Pacer (embedded powermeter)
- PowerTap G3 or GS (limited supply)
Weight (nominal) - Rear 1120gr / Front 780gr (1900gr)
Tire Fitting - TLR (tubeless) or standard Clincher OK. 700c (622BSD) 18mm bead seat. 25c - 35c tire is best fit.
Recommended Use:
All around race, triathlon and TT where clincher tire is preferred. Aerodynamic 'sweet spot' of this wheelset is approximately 35-50kph.
Finish Options:
- Astuto bi-color disctinctive high visibility finish in several color options.
- Custom colors available at extra cost.
Accessories:
Brake pads, Skewers, Rimtape and TLR Valveset
Specifications:
Rim - Full Carbon, high modulus, high Tg (250C+) thermo infused molding.
Spokes - DT Aerolite and /or Sapim CX-Ray. DT Pro-Lock brass nipples.
Lacing - 24 rear (2:1) , 20 front (radial)
Profile - 26.5mm (brake track) x 69mm / 79mm deep, NACA optimised strut profile.
Hubs available -
- Astuto SL straightpull, TruSpin design with 2:1 tangential lacing (rear).
- Onyx RD hubset (sprague clutch system)
- Astuto / SOTEC Pacer (embedded powermeter)
- PowerTap G3 or GS (limited supply)
Weight (nominal) - Rear 1120gr / Front 780gr (1900gr)
Tire Fitting - TLR (tubeless) or standard Clincher OK. 700c (622BSD) 18mm bead seat. 25c - 35c tire is best fit.
Recommended Use:
All around race, triathlon and TT where clincher tire is preferred. Aerodynamic 'sweet spot' of this wheelset is approximately 35-50kph.
Finish Options:
- Astuto bi-color disctinctive high visibility finish in several color options.
- Custom colors available at extra cost.
Accessories:
Brake pads, Skewers, Rimtape and TLR Valveset
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
Fixed Gear Crit 40mm Carbon Tubeless Wheelset
¥88,000
¥65,000
Only a few left!
Built to take on the challenge of fixed gear road criterium our tubeless 40mm wheelset combines strength, agility and stiffness to match the most powerful sprints and twisty courses. I've taken our existing discbrake rimset that features reinforced nipple bedding and high stiffness designed and combined it with a solid, alloy track hub and Sapim CX-Ray spokes. Result is voila! Stiff, light, responsive FGC wheel!
Competition 35mm Carbon Clincher - Onyx RD1
¥219,000
Instant Engagement. Onyx hub exact matched to our competition rimset makes this one of our favorite performance and style driven wheelsets. The generous 26mm clincher section is compatible with tire size to 28 or 30mm making it a favorite for multi-surface roadways. Tubeless compatible with high durability and high Tg layup.
Specifications:
Rim - Full Carbon, high modulus, high Tg (250C+) thermo infused molding.
Spokes - DT Aerolite and /or Sapim CX-Ray. DT Pro-Lock brass nipples.
Lacing - 24 rear (2:2) , 20 front (1X)
Profile - 26.5mm (brake track) x 35mm deep, NACA optimised strut profile.
Hub - Onyx RD1
Weight (nominal) - Rear 810gr / Front 660gr (1470gr)
Tire Fitting - TLR (tubeless) or standard Clincher OK. 700c (622BSD) 18mm bead seat. 25c - 35c tire is best fit.
Recommended Use:
All around race, training, sportif where condition flexibility is required and clincher tire is preferred. Aerodynamic 'sweet spot' of this wheelset is approximately 35-40kph.
Accessories:
Brake pads, Skewers, Rimtape and TLR Valveset
Specifications:
Rim - Full Carbon, high modulus, high Tg (250C+) thermo infused molding.
Spokes - DT Aerolite and /or Sapim CX-Ray. DT Pro-Lock brass nipples.
Lacing - 24 rear (2:2) , 20 front (1X)
Profile - 26.5mm (brake track) x 35mm deep, NACA optimised strut profile.
Hub - Onyx RD1
Weight (nominal) - Rear 810gr / Front 660gr (1470gr)
Tire Fitting - TLR (tubeless) or standard Clincher OK. 700c (622BSD) 18mm bead seat. 25c - 35c tire is best fit.
Recommended Use:
All around race, training, sportif where condition flexibility is required and clincher tire is preferred. Aerodynamic 'sweet spot' of this wheelset is approximately 35-40kph.
Accessories:
Brake pads, Skewers, Rimtape and TLR Valveset
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
On Sale
Project 167 'Hammer Harder' 55mm Wheelset
¥159,000
¥139,000
This is one of our collaboration products with IMEZI 167. It features the same '167' V2 rim but specially drilled and matched to our Astuto SP hubset and laced with Sapim CX-Ray Spokes. Like all our Astuto Competition wheels - it is handmade in our Japan Atelier and pre-tested rigorously to meet exacting tension and truing standards.
Astuto SL88 Carbon Frameset
¥139,000
Monocoque molded from hi-modulus carbon fabric and thermo-infused resin makes this an extremely light, stiff and responsive frameset. It is perfect for tackling hard sportifs, amateur racing and KOM hunting.
As with all our Factory Select frames, the SL88 features special finish scheme, complete with fork, headset, seatpost clamp and bottom bracket kit. (Shimano ready). Warranty is 3yrs finish and lifetime against factory defects.
Sizes of this frame are 51, 54, 57, 59* We suggest sizing a bit small since the reach is set for more flexible and aggressive riders.
Besides the colors shown, we can offer other custom colors at a small upcharge. Please inquire if you want a color option different than shown.
*59 Version is a slightly different layup to increase overall strength and durability
As with all our Factory Select frames, the SL88 features special finish scheme, complete with fork, headset, seatpost clamp and bottom bracket kit. (Shimano ready). Warranty is 3yrs finish and lifetime against factory defects.
Sizes of this frame are 51, 54, 57, 59* We suggest sizing a bit small since the reach is set for more flexible and aggressive riders.
Besides the colors shown, we can offer other custom colors at a small upcharge. Please inquire if you want a color option different than shown.
*59 Version is a slightly different layup to increase overall strength and durability