ReadyToRace 11s Chain Kit

SKU:
¥8,000
¥8,000
Unavailable

Specially cleaned and low friction treated new Shimano chain (HG-701) packed with a tube of AdrenoTT for easy followup maintenance.


The HG-701 Chain is our favorite race ready chain featuring high strength , good durability and low friction thanks to the Sil-Tec coating.


We de-grease the chain of the factory heavy oil in special bio^degreaser and acetone bath. Then we immerse the chain into a heated bath of our own shop formula paraffin / PTFE plus additives to ensure complete coating and penetration of the Paraffin and PTFE.


Included is the Shimano 'Quick Link' for easy sizing and fitting to your bike.


The AdrenoTT follow-up product lets you keep the chain in top rolling condition without using power sucking oils or other types of lubricants which generally attract dirt and /or do not provide as good friction reduction as the high - penetrative AdrenoTT compounds.

GS ASTUTO READY TO RACE CHAIN KIT

We've been wax treating chains since the early 80's. There's nothing new in the pro world about this. It's long been proven the best way to provide lubrication for a bicycle chain is penetrative paraffin. With the advent of ultra low friction ptfe additives, we can improve the basic formula with a longer lasting and even lower friction characteristics. Also by using special additives that create higher material bonding to the chain surfaces we can further enhance the coating. The Astuto RaceReady chain features a pre-treated chain based on the Shimano HG-701 which we've had great success over hundreds of races in all kinds of environmental conditions and situations. It stands up to 1500w+ sprints as well as day in and out training and racing in all conditions.

Included with your chain is a tube of AdrenoTT. This is a specially formulated ultra-low friction paraffin / ptfe mixture that has lower melting point than our pre-treating bath and makes it suitable for ongoing maintenance and 'top up' of your chain to keep it in the best race ready condition. Typical maintenance is simply cleaning the chain with a microfiber towel and a little acetone to remove the surface build up. Then apply the AdrenoTT after heating it in hot water. To further enhance the penetration of the AdrenoTT we recommend to use a hot air gun (hair dryer works great) to gently warm the chain prior to applying the AdrenoTT. Then wipe off any excess to clean and polish the chain exterior and you're ready to go!
New chains are bit a stiff and generally need to be 'broken in' before serious competition efforts. We recommend that you ride the chain for a 100km or so, (indoor or out) to fully bed in the links and reduce any stiffness. Following the break in period is a great time to use the AdrenoTT to fully prepare your chain for ongoing racing or training.
Not just for racing! We also use the same treated chains in our long service rental and touring bikes. The wax/PTFE keeps your drivetrain clean and lasts far longer than oil based lubricants. We are seeing up to 2500km between cleaning sessions and chains lasting upwards of 10,000km or so. Of course your individual conditions may vary, but we can say this is the best set we've tried so far.
​